A-STAND Hotmetal Lacquer Carbon

30 mL jar

A-STAND Hotmetal Lacquer Carbon
The A-Stand Hot
Metal line has been formulated to simulate the iridescent burnt metal
tones created by the high temperatures generated by aircraft jet
engines. They can also be very useful to simulate this effect on exhaust
pipes or any other metal element affected by heat and exhaust gasses.
You must keep in mind that if you apply a larger amount of product, the
effect will be more intense.

Why to use A-Stand?
The excellent fluidity of
A-Stand products makes them easy to spray without clogging the airbrush.
They also provide a tough and durable finish once dry, allowing the
application of any other lacquer, enamel weathering products, or acrylic
paint on top without issue. In addition, modelling masking tape can be
applied over the hard finish of the A-Stand paints with no problem.

A-Stand products dry to the touch in a short period of time of
approximately 30 minutes, depending on the amount of paint applied,
ambient humidity and temperature. Allow 1 hour of drying time before the
applying other products safely, they will completely cure in 24 hours.
The thinner used in these paints and varnishes, like in other lacquer
products, are only suitable for airbrush use, not for brush painting.

Remember that all
lacquer paints contain toxic components and it is advisable to use
a mask for its application, and to spray these products in a
well-ventilated area.

The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner A.MIG-2013