AMIG 2050 Ultra Matt Varnish 60ml

Mattalakka 60ml.

Flat medium/varnish for all kinds of acrylic paints. Guarantees 100%
flat finishes. This varnish can be used in two different ways:
- used straight from the jar as a regular varnish after painting to achieve a dead flat finish.
- it can also be used as a flat medium by adding it to acrylic paints.

Varnish
application has long been one of the biggest challenges for modelers.
Many have ruined a few models due to the use of poor quality or
inappropriate varnishes for the job at hand, and the thing is that the
varnishing process is an extremely important step of the build. For the
first time, AMMO releases a complete varnish range for winning results
on each and every model.
These acrylic varnishes will allow you to
get the best results with both brush and airbrush in a very simple
manner. It must be used in thin layers, and can be applied directly from
the jar without thinning for a perfect finish. When used through the
airbrush, we recommend spraying 6 inches (15 cm) away from the surface.
It is non-toxic and odorless, and dries completely in 24 hours.
This
new varnish range was carefully developed over a lengthy period to
ensure the modeler a perfect result every time. Don´t take your chances,
use LUCKY VARNISH, a winning product that will rule out any mishap that
may occur when using ordinary varnishes. Available in all the usual
finishes used in scale modeling, from high gloss to dead flat.

Easy
to use and simple to clean. Incredible transparent finishes for all of
your models, and accurate for all subjects. Will not yellow or alter
colors.
Perfect for both brush and airbrush.
1- Using an airbrush, apply in light and short passes using 1.2 bar (17psi) air pressure, avoiding build up.
2- Let dry at least 5 minutes between coats. Do NOT flood the surface.
3- Let it dry completely for 12 hours.
No thinning needed. Clean with A.MIG-2000 or water