• VMS CA Glue Filler
VMS CA Glue filler

Mixed with this fine powder CA glue turns into fast curing putty you can use for instant gap filling much like the standard putty but without the usual wait. Recommended to mix with VMS Flexy SLOW CA Glue. Use: Dispense a portion of CA glue on a piece of styrene, metal sheet, never on cardboard. Spray some powder onto the glue and mix it with a toothpick till you reach the consistency of putty. Quickly apply the putty and even it with a hobby knife to minimise the residue around the gap. Once the filling is dry sand it with 600 grade paper and follow with 1000 grade. Please click the bottle photo to see this product in action!

Combine with: CA Glue

Recommended techniques: mix using a toothpick, apply with a blade

Available volumes: 13 g in a 30 ml dropper bottle

VMS CA Glue Filler: Turn your CA glue into quick drying putty!

Mixed with this fine powder CA glue turns into fast curing putty you can use for instant gap filling much like the standard putty but without the usual wait.  

CA GLUE FILLERCA GLUE FILLERCA GLUE FILLERCA GLUE FILLER

Quickly seal any gaps in your model and move on with your project while standard putty only begins to dry!


Dedicated for CA glues!

Whenever you run out of putty or standard type is too slow you can mix fast curing putty using your CA glue and this filler powder. CA putty dries to solid filling that is easily sanded down. You can also apply this filling in layers and make combined fillings with other putties if necessary. 

VMS CA Glue Filler

  • Tuotemerkit VMS
  • Tuotenumero: VMSAX10
  • Saatavuus: 2
  • 11,00€


Katso myös nämä tuotteet

VMS Flexy 5K Slow Action CA Cement

FLEXY 5K CA contact adhesive for photo-etched SLOW typeFThis is a much slower version of widely ac..

10,50€