FLEXY 5K CA contact adhesive for photo-etched SLOW type
FThis is a much slower version of widely acclaimed Flexy 5K glue, thanks to its formulation this glue can be used for gluing parts that require a lot of adjustment such as photo-etched Zimmerit sheets, metal panels, armour plating and the like. As the original Flexy 5K glue forms flexible bond that withstands much more punishment than classic brittle CA. This essentially means less accidentally lost parts and more productive and enjoyable work as there is much less need to reglue vulnerable parts. Extended open time (500% the standard CA) allows for very smooth positioning of the parts. You also will be able to glue tricky parts (both PS and metal) that produce tension. Flexy is less aggressive and more easily removed when necessary it doesn't "eat plastic" as classic CAs. Please click the bottle photo to see this product in action!
Combine with: photo-etched parts + polystyrene
Recommended techniques: apply with wire
Available volumes: 25 gr dropper bottle
FOR PE PARTS, SLOW
Flexible CA bond!
Have
you ever lost or have to re-glue some PE parts during painting or
weathering or maybe just by accident why manipulating your model? If so
this glue is for you! Flexible bond created with Flexy 5k withstands
much more punishment than classic brittle CA. This essentially means
less accidentally lost parts and more productive and enjoyable work as
there is much less need to reglue more vulnerable parts such as
antennas, clamps, clasps, wing nuts and the like.
Have you ever lost or have to re-glue some PE parts during painting or weathering or maybe just by accident why manipulating your model? If so this glue is for you! Flexible bond created with Flexy 5k withstands much more punishment than classic brittle CA. This essentially means less accidentally lost parts and more productive and enjoyable work as there is much less need to reglue more vulnerable parts such as antennas, clamps, clasps, wing nuts and the like.
5-10x longer manipulation time
Extended
open time of our photo etch glue (500% of Flexy 5K original) allows for
good positioning of PE parts. Depending on how much glue you use you
will have 5 to 10 times more time to position the part than with Flexy
5K original. This glue is great to position parts that need a lot of
aligning such as fender sheet metal, metal Zimmerit sheets and also
small parts such as hinges or bolt heads.
Extended open time of our photo etch glue (500% of Flexy 5K original) allows for good positioning of PE parts. Depending on how much glue you use you will have 5 to 10 times more time to position the part than with Flexy 5K original. This glue is great to position parts that need a lot of aligning such as fender sheet metal, metal Zimmerit sheets and also small parts such as hinges or bolt heads.
Not aggressive towards PS
Flexy
is less aggressive and more easily removed when necessary it doesn't
"eat plastic" as classic CAs. therefore it is more easily removed when
needed. Most of the time simple scrubbing followed by some sanding will
do, no debonders needed.
Flexy is less aggressive and more easily removed when necessary it doesn't "eat plastic" as classic CAs. therefore it is more easily removed when needed. Most of the time simple scrubbing followed by some sanding will do, no debonders needed.
Photo-etched parts are a great way to add detail to your models, still
in isn't always easy to position and affix them them well. General
use CA bonds too quickly to position the parts well, forms brittle bond
and attacks plastic. Flexy 5k is the opposite of standard CA + it comes
in 25 gr bottle!
Flexy
5k Slow allows you to position PE parts even more easily and the
resulting flexible bond is way more durable that with classic CAs!
Katso myös nämä tuotteet
VMS CA Glue Filler
VMS CA Glue fillerMixed with this fine powder CA glue turns into fast curing putty you can use f..
11,00€