Our airbrush guns have an excellent spraying pattern, are delivered completely without plastic components and can be easily dismantled for an easy cleaning.

The connection to a compressor is made via a 9,51 mm (⅛″) external thread directly to the gun.

Airbrush Explanation of double-action (DA) function

As “single action” is called an airbrush, if only the air volume is regulated with the operating lever and the paint volume with another regulator. In the case of double-action airbrush, this happens with one lever: by pressing down the lever, you regulate the airflow, by turning it back (at the same time), you can regulate the paint volume. By activating the control lever downwards, the compressed air flows forwards, out on the needle cap. Only by pressing the control lever backwards, the paint comes out of the nozzle and is sprayed on the object due to the air pressure. The more one presses the control lever backwards, the more paint is sprayed. This requires practice, but nothing can prevent that the air flow regulation is carried out by means of the compressor, so that it is recommended to use a double-action airbrush from the beginning. The maximum paint volume can be set at the back on the knurled screw (paint volume-adjusting screw).
- Airbrush gun LN-136T in store box
- 0,2 mm needle and nozzle (WilTec-Art. 34022)
- 0,3 mm needle and nozzle (WilTec-Art. 34021)
- 0,5 mm needle and nozzle (WilTec-Art. 34035)
- Quick connector 9,51 mm (1/8")
- Paint cup (3 ml)